The shape changes how the ring sits, not just how it looks
Both triangle and rectangular rings can connect a bag strap to a bag body, but they do it differently. A triangle ring has a flat top edge and two angled sides that meet at a point, while a rectangular ring keeps parallel sides and square corners. That geometry affects how the ring hangs from a strap tab, how a swivel hook loads it, and how much of the ring stays visible once the tab is folded.
The supplied catalog evidence covers a flat triangle ring in detail. Rectangular rings are a common alternative shape, but this comparison only goes as far as the supplied records allow. Where a measurement or feature is not confirmed for rectangular rings, treat it as a question to check against the actual hardware rather than an assumption.
What the Triangle Rings record confirms
- Triangle Rings (2 pack) - 1 Inch: The Triangle Rings (2 pack) - 1 Inch fit a 1" (25 mm) bag strap and have two holes. The strap width is the first compatibility check for any connector ring. A 1 inch strap is the stated fit for this piece.

Triangle Rings (2 pack) - 1 Inch - Triangle Rings (2 pack) - 1 Inch: Inside measurements are 1" (25 mm) wide by 7/8" (22.23 mm) high, and overall width is 1-1/4" (31.75 mm). The inside height tells you how much room a swivel hook or strap loop has. The overall width tells you how much space the ring takes on the bag.
- Triangle Rings (2 pack) - 1 Inch: The top hole is designed for a swivel hook, and the ring is sold as a set of 2. This is a connector ring, not a slider. It pairs with a hook rather than gripping the strap itself.
Triangle vs rectangular: where the difference shows up
Use this as a decision framework, not a scorecard. The triangle column reflects supplied evidence; the rectangular column lists the checks you need to make on the hardware you actually have.
- Strap fit: The supplied Triangle Rings fit a 1" (25 mm) strap. For a rectangular ring, confirm the inside width matches your strap width before buying; a 1 inch label alone does not guarantee the same inside opening.
- Load direction: A triangle ring concentrates load toward its pointed end, so the ring tends to settle in one orientation. A rectangular ring spreads load across a flat bar. Which is better depends on whether you want the ring to stay put or pivot freely.
- Swivel hook interface: The Triangle Rings record states the top hole accepts a swivel hook. On a rectangular ring, check that the bar thickness and opening suit your hook's gate.
- Strap tab construction: The Triangle Rings record notes the rings resist sliding and twisting in strap tabs. Rectangular rings with square corners can catch on tab stitching if the tab is narrow, so test-fit before sewing.
- Visual weight: A triangle reads as a deliberate design detail; a rectangle reads as structural and understated. Neither is more correct, but the shape should match the bag's style.
What to measure before you commit to either shape
These checks apply to any 1 inch bag hardware you are considering. They are especially important when you switch between shapes, because the outside footprint can differ even when the strap width is the same.
- Strap width: Measure the finished strap, not the webbing before folding. The Triangle Rings record specifies a 1" (25 mm) strap fit.
- Inside height: The Triangle Rings inside height is 7/8" (22.23 mm). Check that your hook or loop fits through that opening with room to move.
- Overall width: At 1-1/4" (31.75 mm) overall, the Triangle Rings need that much clearance on the bag panel or tab. A rectangular ring may have a different overall width for the same strap size.
- Tab depth: The tab must be deep enough to hold the ring securely. The supplied record does not give a tab depth, so base this on your pattern and a test seam.
- Finish match: The Triangle Rings come in six finishes, with Bronze, Gold and Gunmetal listed as variants. If you are matching existing hardware, confirm the rectangular option comes in the same finish before committing.
When the triangle ring is the simpler choice
Choose the Triangle Rings (2 pack) - 1 Inch when you are building a 1 inch strap and want a connector that resists sliding and twisting in the tab. The two-hole design gives you a defined top hole for a swivel hook, and the flat top edge sits cleanly against a folded tab. The lacquer finish is a practical detail too: each piece is individually dipped and later sprayed, which the record presents as protection and shine.
The tradeoff is orientation. A triangle ring wants to hang a certain way, so it suits bags where the strap connector is meant to read as a fixed design element. If you need a connector that pivots freely in any direction, a rectangular ring may be the better shape, provided its measurements suit your strap and hook.
When a rectangular ring may suit you better
Rectangular rings are worth considering when you want a flatter, more architectural look, or when your strap tab is wide enough that square corners will not catch. They can also be easier to source in a specific finish if you are matching hardware across a bag.
The supplied information does not include a rectangular ring record, so this article cannot confirm its inside dimensions, bar thickness, or finish range. Before you buy, compare the inside width and height against the Triangle Rings figures above, and test the ring with your actual strap and hook. If the rectangular ring's inside height is smaller than 7/8" (22.23 mm), a bulky swivel hook may not sit comfortably.
A quick test-fit routine for either shape
Run this before you sew the tab closed. It takes a few minutes and catches most fit problems.
- Thread the strap: Slide the ring onto a scrap of your finished strap. It should pass through without forcing and without excessive play.
- Attach the hook: Clip your swivel hook into the intended hole or bar. Check that the hook gate opens fully and does not bind on the ring.
- Fold the tab: Fold the tab as your pattern directs and pin it. Confirm the ring stays centered and does not twist.
- Check clearance: Lay the tab against the bag panel. The overall width of the ring should not overhang the seam allowance or rub against a zipper.
What this comparison cannot settle
The supplied evidence covers the Triangle Rings in useful detail but does not include a rectangular ring record. That means there is no confirmed rectangular inside height, overall width, bar thickness, or finish list to set against the triangle figures. Treat any rectangular measurements you see elsewhere as unverified until you check them against the actual product.
The record also does not give a tab depth, a maximum load, or a recommended hook size. Those are pattern and project decisions, not catalog facts. Use the measurements above as your fixed reference points, and test-fit the hardware before you commit a strap to a finished bag.

